Colonet JR-4 mounted on bathroom wall with slide on bracket
Colonet JR-4 can be placed on a stool or other surface
Colonet JR-4 mounted on wall via slide on bracket
Shower and sink adapters with hose quick connectors are included
Clean and sanitary procedure uses disposable speculum and hoses |
DIMENSIONS
Dimensions for main unit:
Size: Height 16" ( 41cm), Width 13" (34cm),
Depth 10" (25cm) Weight 13 Lbs.
Dimensions for Shipping:
1 Box, Size: Height 17" ( 43cm), Width 14" (36cm),
Depth 12" (31cm) Weight 18 Lbs. (8.5 Kg.)
INSTALLATION
The Colonet JR-4 is easy to set up in any bathroom
- Allows for various placement options.
- Easily stored out of sight when not in use.
- Easily placed in position for treatment.
- Can mounted on the bathroom wall with slide-on bracket
- Can be positioned over bathroom sink.
(SEE DIAGRAM BELOW FOR MOUNTING DETAILS)
Lay on Surface (Optional)
- Fits standard bathtub.
- Made from durable, natural fir wood and stainless steel non-rust hardware.
- Includes Velcro straps and blocks to secure surface on bathtub and keep Colonet controls within easy reach.
- Folds or rolls up tight for easy storage.
- Includes: A) Velcro snap-button to secure hose-controls within easy reach and B) Velcro block to prevent surface from sliding off bathtub.
Mounting The Colonet JR-4 on a Wall
Connecting the Colonet JR-4 to plumbing
- Shower and sink adapters included
- Hose quick connectors included for easy set up
- Waste hose fits easily into standard toiled trap
Setup and Flow Diagram
Installation Reminders
Must be placed a minimum of 30” above surface you lay upon.
Ensure there is space for unobstructed water flow from bathtub faucet to the bathtub drain.
In order to use the COLONET JR-4 optimally, it is necessary to have a surface to lay on that is close to the toilet and the water supply. In most bathrooms such a surface can be easily created with a plywood board that fits the individual bathtub and leaves sufficient space for the bathtub faucet to function.
Any other surface, such as a massage table etc. needs to be at least as high as the top of the toilet.
IMPORTANT:
Regardless of which placement option you choose, the COLONET’S elevation has to be a minimum of 30” higher than the surface you lay on for gravity flow to function properly. |
